Stay Signed In
Do you want to access your site more quickly on this computer? Check this box, and your username and password will be remembered for two weeks. Click logout to turn this off.
Stay Safe
Do not check this box if you are using a public computer. You don't want anyone seeing your personal info or messing with your site.
A molten carbonate fuel cell-it has a C02,H2and 02 input.At first the H2 molecule splits into two and is just a H2 atom, the CO2 molecule mixes with an oxegen atom and makes CO3(carbon trioxide),the CO3 loses its electrons on the negetive plate, they travel through the circiut to the positive plate,meanwhile the CO3 ions travel through the ion exange membrane and one oxegen ion comes off and travels to the H2 atom and the electron on the positive plate gets pulled by the oxegen ion and forms a H20 molecule the CO2 ion also gets electrons the C02 gets recycled ready for reuse.
A molten-carbonate fuel cell makes a lot of heat (1,200degreesC)and can be used to boil water which would then turn a steam turbine to make adittional electricity.
compressor
A modern turbofan engine has various problems,it requiers non-renewable fuel such as keroscene/paraffin or deisel and uses lots of fuel,not good for low-density hydrogen.
The turbofan works by having a starter motor driving a large fan on a centeral prop and the tube that the air is moving through gets narrower and comes through a gas turbine engine supported by spokes,it passes through a compressor and gets realy hot and fuel is injected into it and the feul combusts and also expandes turning a turbine which is conected to the centeral prop and comes out through the back ,as the turbine,fan and compressor the motor only needs to operate once.
fan/
compressor
A turbofan engine of the future works via a fan sucking in air and traveling into a pre-combuster which draws in air to turn a turbine and burns hydrogen(H2) and comes through the rear jet the air from the fan also travels into the rear jet with hydrogen,it is ignited by the hot gas from the pre-combuster and the exaust is H2O ,it uses less fuel than a modern turbofan,great for low-density hydrogen
future turbofan
A homemade tidal power plant that could either be on a houseboat or barge, when the tide comes in, the water vanes on the wheel turn one side of the gear down spining the genorator round ,when the tide comes out ,the vanes turns the other side of the gear up,turning the genorator round,the good thing is that the genorator always spins the same way.
<Houseboat design:this houseboat i designed that is made of a bamboo truss then a rug as insulation and a second indoor truss.The eco-features are: reclaimed materials,compost loo,rubish incinarator,hydrogen production and power,wind power,sea water distallination.
the telephone line for this houseboat would be via a bt wireless adaptor and ariel at the phone pole and a car phone at the house boat with a wire coming out the phone conection in the phone and it will go to a normal phone and internet reciever
lamina flow stirling engine
stirling engine: this engine displaces air between the hot and cold sides and uses a piston moved by expansion and contraction to produce work
marble run sirling engine
this thermal hydaulic engine uses liquid co2 as the working fliud and it altertaly heats and cools the cylinder usining 2 pintle injectors ,this is a twin cyliner engine,the injectors are controled by 2 double acting solenieds ,a sensor detects when it is top dead centre and ingages a solelied on the same cylinder, thus detecting bottom dead cetre in the other cylinder, the t.d.c cylinder would be heated the b.t.d cylinder would be cooled thus moviving the pistons and a linear genorator and produsing electricty.the reason its liner is that the co2 is above atmostheric pressere.
